Description
STvega Meat Injector H300 Automatic Meat Injector is designed to evenly inject brine and auxiliary ingredients into meat raw materials to achieve the optimal effect of preparing the product for further processing, which can shorten the marinating time and greatly improve the taste of products.
The injector directly injects a pre-configured brine concentration (pickling liquid) through a special needle. According to the process needs, the saline injection machine can adjust the step speed, step distance and injection pressure. This brine injector can be used to process pork, beef, lamb, fish, chicken, and other meat products.
Principle of operation:
The STvega Meat Injector H300 automatic injector for meat products consists of an injection machine and a brine container with a filter connected to each other. The equipment is connected to the mains and provides automated injection of brine into meat raw materials by repeated piercing with injection needles.
The product is laid out by the operator on a conveyor, which moves it to the injection area. During operation, the block of needles is lowered, the needles pierce the meat and inject the solution under pressure, after which they rise. Once the cycle is complete, the conveyor moves the product further and the cycle repeats.
The injection solution is supplied to the needles using a pump from a filtration tank. The system is equipped with multi-stage filtration to prevent clogging of the needles. The pressure in the system is monitored using a pressure gauge on the machine body.
The needles have a spring-loaded design: in the event of a collision with a solid inclusion, they are automatically deflected, which helps prevent damage. The speed of product transportation is adjusted by the operator using a control panel with a frequency converter.
The company provides full service and warranty service.
Who is STvega Meat Injection H300 suitable for?
This equipment is installed not when it is “interesting to try”, but when there is already volume and you need to keep the quality stable.
STvega Meat Injection H300 is needed where it is important not only to marinate meat, but to do it quickly, evenly and without loss.
Suitable for:
Meat processing plants and processing shops
Sausages, ham, delicacies. Where the repeatability of the result is important.
Smoked meat
manufacturersInjection before heat treatment avoids overdrying and gives a stable taste.
Poultry farms
Fillets, thighs, pickled products. Gives juiciness even after baking or freezing.
Fish production
Fillets and steaks. Uniform salting without “over-salted zones”.
Farms
When you need to raise the price of a product due to quality and appearance.
Workshops of
semi-finished productsMeat for baking, cooking or freezing.
In short, this is a solution for those who want control rather than a random outcome.
What STvega Meat Injection H300 processes
The main function is the introduction of brine or marinade into the product.
And this is what gives the difference in taste, weight and appearance.
Works with:
Pork, beef, lamb
Whole pieces, large cuts. Uniform saturation without long pickling.
Chicken and turkey
Fillet, thighs, wings. The product remains juicy after heat treatment.
Fish and seafood
Fillets and steaks. Control of salinity and texture.
Semi-finished meat products
Blanks for smoking, baking or selling raw.
An important point:
the injection takes place through a system of needles with parameter control, so the distribution of the marinade is uniform throughout the product.
Plus the conveyor feed is without manual work and with the same result in each batch.
Why buy STvega Meat Injection H300 at STvega
The difference here is not only in the equipment, but in the approach.
And often this is what determines whether there will be a result.
Matching for your product
Take into account the type of meat, recipe, volume. This affects the effectiveness of the injection.
Testing
CapabilityYou can check on your product:
How the marinade
goes in, what is the output
, how the taste changes
And only after that make a decision.
Flexible settings
The pressure, speed and density of the injection are regulated. Suitable for different tasks.
Consistent performance
Uniform operation without subsidence under load. This is important for mass production.
Less Loss and Higher Product
YieldThe right injection gives more finished product without deterioration in quality.
Service Launch
Assistance with onboarding, configuring, and training staff.
Experience in the food industry
It makes it possible to avoid common mistakes and immediately set up the process correctly.
